We care for your eyes

In all ExamVision lights, we use “neutral white” (≤5,000 to ≤6,500 Kelvin) LEDs for the most natural lighting possible. When considering LEDs with higher Kelvin (more blue light) than the ExamVision Focus range, remember that this means consequently higher lux (or foot candles), but it also means more unnatural light, eye strain – and risk of retinal damage.

Covers the whole range of Lux-demands

The Focus LED light system enhances visual comfort. No hot-spot and no glare, because the multi-lens design of the lamp gives a bright yet even light spot. The Focus illuminates a circular area of 70 mm from a distance of 35 cm and is available in two colour temperature, Focus Bright and Focus True.

Focus Bright

• Bright, neutral white ≤6,500 Kelvin
• Light intensity 19,000 lux at 35 cm
• Light spot, 70 mm at 35 cm
• Brightness settings go in high, medium and low.
• Lamp weight only 17 gm
• Up to 6-24 hours operating time

Focus True

• Bright, neutral white ≤5,000 Kelvin
• Light intensity 17,000 lux at 35 cm
• Light spot, 70 mm at 35 cm
• Brightness settings go in high, medium and low
• Lamp weight only 17 gm
• Up to 6-24 hours operating time

Focus Xtend Control Unit

ExamVision’s range of lights is specially designed to give you the illumination you need and prefer. The Focus Xtend control unit is operated by pressing the front panel, with your hand or elbow. A short press will activate the unit, and further clicks will cycle the unit through low, medium and high settings. Focus Xtend gives you approx. 6 to 24 hours of operating time depending on the chosen light intensity‌.

Flicker-free video
Artificial lighting appears continuous to our eyes, but it illuminates using high-frequency pulses of light. Flickering occurs on video when the frame rate captures different levels of light. ExamVision lights have been engineered to keep the level of illumination constant, so the end result will always be clear, flicker-free video.